Wireless Sensor Network Overview :

Wireless Sensor Networks (WSNs) can be defined as a self-configured and infrastructure less wireless networks to monitor physical or environmental conditions, such as temperature, sound, vibration, pressure, motion or pollutants and to cooperatively pass their data through the network to a main location or sink where the data can be observed and analysed. A sink or base station acts like an interface between users and the network. One can retrieve required information from the network by injecting queries and gathering results from the sink. Typically a wireless sensor network contains hundreds of thousands of sensor nodes. The sensor nodes can communicate among themselves using radio signals. A wireless sensor node is equipped with sensing and computing devices, radio transceivers and power components. The individual nodes in a wireless sensor network (WSN) are inherently resource constrained: they have limited processing speed, storage capacity, and communication bandwidth. After the sensor nodes are deployed, they are responsible for self-organizing an appropriate network infrastructure often with multi-hop communication with them. Then the on board sensors start collecting information of interest. Wireless sensor devices also respond to queries sent from a “control site” to perform specific instructions or provide sensing samples. The working mode of the sensor nodes may be either continuous or event driven. Global Positioning System (GPS) and local positioning algorithms can be used to obtain location and positioning information. Wireless sensor devices can be equipped with actuators to “act” upon certain conditions. These networks are sometimes more specifically referred as Wireless Sensor and Actuator Networks as described in (Akkaya et al., 2005).

Wireless sensor networks (WSNs) enable new applications and require non-conventional paradigms for protocol design due to several constraints. Owing to the requirement for low device complexity together with low energy consumption (i.e. long network lifetime), a proper balance between communication and signal/data processing capabilities must be found. This motivates a huge effort in research activities, standardization process, and industrial investments on this field since the last decade (Chiara et. al. 2009). At present time, most of the research on WSNs has concentrated on the design of energy- and computationally efficient algorithms and protocols, and the application domain has been restricted to simple data-oriented monitoring and reporting applications (Labrador et. al. 2009). The authors in (Chen et al., 2011) propose a Cable Mode Transition (CMT) algorithm, which determines the minimal number of active sensors to maintain K-coverage of a terrain as well as K-connectivity of the network. Specifically, it allocates periods of inactivity for cable sensors without affecting the coverage and connectivity requirements of the network based only on local information. In (Cheng et al., 2011), a delay-aware data collection network structure for wireless sensor networks is proposed. The objective of the proposed network structure is to minimize delays in the data collection processes of wireless sensor networks which extends the lifetime of the network. In (Matin et al., 2011), the authors have considered relay nodes to mitigate the network geometric deficiencies and used Particle Swarm Optimization (PSO) based algorithms to locate the optimal sink location with respect to those relay nodes to overcome the lifetime challenge. Energy efficient communication has also been addressed in (Paul et al., 2011; Fabbri et al. 2009). In (Paul et al., 2011), the authors proposed a geometrical solution for locating the optimum sink placement for maximizing the network lifetime. Most of the time, the research on wireless sensor networks have considered homogeneous sensor nodes. But nowadays researchers have focused on heterogeneous sensor networks where the sensor nodes are unlike to each other in terms of their energy. In (Han et al., 2010), the authors addresses the problem of deploying relay nodes to provide fault tolerance with higher network connectivity in heterogeneous wireless sensor networks, where sensor nodes possess different transmission radii. New network architectures with heterogeneous devices and the recent advancement in this technology eliminate the current limitations and expand the spectrum of possible applications for WSNs considerably and all these are changing very rapidly.

wireless sensor network